Rongwin's Detachable Fuel Tank Design for Convenient Maintenance and Handling
1. The electro-hydraulic servo system adopts on-demand oil supply mode to reduce overflow and save energy by more than 30%. 2. Heat balance temperature is low, fuel tank capacity is reduced,service life of hydraulic system and components is prolonged. 3. Long interval of oil change,reduce energy waste and reduce user cost. 4. When bending the workpiece of different specification,the speed can be adjusted. 5. High precision,energy saving,environmental protection and efficiency.
Features
- Minimize overflow losses.
- Stepless speed regulation is possible. The adjustment range is 0 to max.
- Fully adapt to the use characteristics of the bending machine, and minimize useless power consumption through real-time intelligent control of the servo motor speed.
- Precise oil dosing on demand, optimized by dynamic servo motor speed.
- No idle power: Servo motors can be turned off when flow or pressure is not required.
- Fast down and return speed up to 200mm/s, working speed up to 20mm/s
- Compact design for easier installation.
- The machining difficulty of the oil cylinder is reduced, and the cost is reduced.
- The stainless steel oil tank is used, and the oil pump is easy to disassemble.
- Province. 40% power saving compared with traditional transmission
- High. Work efficiency can be increased by 30% (reduced cycle time)
- Accurate. The positioning accuracy is more accurate, up to 5um
- Quiet. Noise reduction, the machine tool works more quietly
- Few. The use of hydraulic oil is very small, only 20% of the traditional
- Easy. Machine tool manufacturing is easier, maintenance is easier, and debugging is easier
Main Servo Motor
The electro-hydraulic servo system adopts on-demand oil supply mode to reduce overflow and save energy by more than 30%
Independent Oil Tank
Over 85% of the bending machine are related to the cleanliness of the hydraulic oil passage. This independent tank with special processing technology, which can reduce the faults related to hydraulic oil to the greatest extent, ensure the stable operation of the machine tool and reduce the failure rate of the equipment.
| Quantity(Sets) |
1-0 |
>10 |
| Est. Time(days) |
15 |
Negotiable |
){kind=link}